-
Royal Installation Kit
$300.00WORK offers a range of lug nuts to be use with WORK Wheels and many other brands of after market wheels. WORK lug nuts are standardized to use with any after market wheel with 60 degree conical taper seat (will not fit OEM seat wheels). Royal Installation Kit Type = Closed-End / Steel / Standard Length / Security Lock and Key Included / 16 lug nuts, 4 locking lug nuts -
RS-R Type Open End Lug Nuts
$200.00WORK offers a range of lug nuts to be use with WORK Wheels and many other brands of after market wheels. WORK lug nuts are standardized to use with any after market wheel with 60 degree conical taper seat (will not fit OEM seat wheels). High strength and quality, using lightweight aluminum in anodized finish. RS-R Type = Open-End / Aluminum / Extended Length / Security Key Included *** Uses 19mm socket for both lug nut and lock key adapter. Always check your vehicle owners manual for proper torque specification for safe vehicle operation. Lugnuts are sold in a pack of 20 (16 lug nuts and 4 lock nuts) + security key. -
RS Type Closed End Lug Nuts
$150.00WORK offers a range of lug nuts to be use with WORK Wheels and many other brands of after market wheels. WORK lug nuts are standardized to use with any after market wheel with 60 degree conical taper seat (will not fit OEM seat wheels). High strength and quality, using lightweight aluminum in anodized finish. RS Type = Closed-End / Aluminum / Standard Length / Security Lock and Key Included / 16 lug nuts, 4 locking lug nuts 12x1.25 thread pitch fits most Nissan/Datsun, Subaru, Suzuki, Infiniti** 12x1.5 thread pitch fits most Acura, Honda, Toyota, Mazda, Mitsubishi, Isuzu, Daihatsu** ** Please note that this serves as a general guide, but you should verify with your owners manual on the lug nut thread pitch of your specific vehicle, as it may differ within vehicle makes. If you are unsure of the thread pitch you require, please contact us directly before ordering. ** RS Type: DO NOT USE IMPACT WRENCH! *** Uses 21mm socket for both lug nut and lock key adapter. Always check your vehicle owners manual for proper torque specification for safe vehicle operation. -
RS-Z Type Open End Lug Nuts
$130.00WORK offers a range of lug nuts to be use with WORK Wheels and many other brands of after market wheels. WORK lug nuts are standardized to use with any after market wheel with 60 degree conical taper seat (will not fit OEM seat wheels). High strength and durability. RS-Z Type = Open-End / Steel / Extended Length / Black Only -
(20) x WS2RM12x1.25BO WORK Meister S2R Tuner Lug Nut M12x1.25 Black Open End (1) x WS2R19HEX WORK Meister S2R 19 Hex Drive Tool Please make sure to verify thread pitch (12x1.25) is accurate before ordering.
-
.
-
Meister Series Center Cap
$60.00. -
V39K Valve Stem
$50.00. -
-
V39A Valve Stem
$40.00. -
Gnosis Series Center Cap
$40.00. -
TPMS Bracket Adapters
$35.00This is a set of (4) bracket adapters that allow you to retain the factory TPMS valvestem/sensor unit while using multipiece valvestems for our WORK Wheels. -
Out of Stock
WORK Gloves
$35.00. -
WORK Coin Pouch
$35.00. -
WORK Coin Pouch
$35.00. -
WORK Coin Pouch
$35.00. -
WORK Coin Pouch
$35.00. -
V24G Valve Stem
$34.00. -
V24K Valve Stem
$34.00. -
V27K Valve Stem
$34.00. -
V27G Valve Stem
$34.00. -
-
Meister CR01 Center Cap
$30.00. -
-
Out of Stock
VS Concept Center Cap
$30.00. -
Seeker Center Cap
$30.00. -
WORK VS-XX Center Cap
$30.00. -
.
-
.
-
V29B2 Valve Stem
$30.00. -
Emotion Series Center Cap
$30.00. -
V29K Valve Stem
$30.00. -
V29R2 Valve Stem
$30.00. -
WORK Zeast Center Cap (Red)
$30.00 -
Equip Series Center Cap
$30.00. -
.
-
V29K2 Valve Stem
$30.00. -
WORK Optional Center Cap
$30.00. -
V41C Valve Stem
$30.00. -
V29A2 Valve Stem
$30.00. -
Schwert Series Center Cap
$30.00. -
V41K Valve Stem
$30.00. -
V29A Valve Stem
$30.00. -
V24C Valve Stem
$24.00. -
V27C Valve Stem
$24.00. -
V13C2 Valve Stem
$24.00. -
V16C Valve Stem
$24.00. -
V36C Valve Stem
$24.00. -
WORK Assembly Bolts (8mm)
$20.00. -
WORK Assembly Bolts (8mm)
$20.00. -
WORK Assembly Bolts (7mm)
$20.00. -
WORK Assembly Bolts (7mm)
$20.00. -
WORK Assembly Bolts (7mm)
$20.00. -
WORK Assembly Bolts (7mm)
$20.00.